Mario Amato diz que não Funaro adverte empresas e propôs a desobediência civil reajustam sem ordem Cip

A economia brasileira vem sendo paulatinamente desorganizada.

A resistência de John Locke e a Constituição brasileira de 1988

Indica como a resistência pode ser discutida a partir do texto da Constituição brasileira, visto que ele não deixa explícitas as regras sobre esse direito. Trata-se de um ensaio teórico com pesquisa exploratória por meio de levantamento bibliográfico e documental, que explica o que é o direito de resistência e como ele pode ser utilizado.

Por um constitucionalismo difuso: cidadãos, movimentos sociais e o significado da Constituição

O presente trabalho se propõe a analisar se e de que modo as pessoas comuns participam da definição do significado constitucional. Busca-se questionar o senso comum jurídico segundo o qual as instituições estatais, e mais especificamente o Judiciário, seriam os responsáveis por definir o sentido da Constituição. Para tanto, são retomados alguns debates já presentes no Direito Constitucional que sugerem essa participação: o debate alemão acerca da Constituição de Weimar de 1919 e a discussão contemporânea sobre constitucionalismo popular nos Estados Unidos. Nesse sentido, analisa-se o papel dos movimentos sociais no processo de construção do sentido constitucional, destacando sua atuação institucional e extrainstitucional, a qual pode ser apreendida por meio de institutos jurídicos como a desobediência civil e a mutação constitucional. A partir desse arcabouço teórico, empreende- se a análise da trajetória do movimento LGBT no Brasil, destacando-se sua interação com as instituições estatais, os contramovimentos e a Constituição. A partir dessa análise, conclui-se pela desejabilidade de um constitucionalismo difuso, justificado com base nas ideias de democracia, renovação da Constituição, empoderamento das pessoas comuns e script para transformação.

Internet e direito autoral: o ciberespaço e as mudanças na distribuição da cultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

RECONHECENDO-SE SEM-RELIGIÃO NAS PERIFERIAS DA CIDADE: LIBERDADE COMPARTILHADA COMO RESISTÊNCIA

Reconhecendo, a partir da constatação empírica, a multiplicidade de escolhas de crenças no Mundo e em particular na periferia urbana paulistana, reconhecemos, também, a emergência criativa de novas possibilidades de crer e não crer. Tal amplitude não apenas aponta para o crer (segundo as ofertas de um sem número de religiões) e o não crer (ateu e agnóstico), mas para uma escolha que poderia vir a ser silenciada e esquecida, neste binômio arcaico e obsoleto, quando alguém se dá à liberdade crer sem ter religião. Reconhecer interessadamente os sem-religião nas periferias urbanas paulistanas é dar-se conta das violências a que estes indivíduos estão submetidos: violência econômica, violência da cidadania (vulnerabilidade) e proveniente da armas (grupos x Estado). Tanto quanto a violência do esquecimento e silenciamento. A concomitância espaço-temporal dos sem-religião nas periferias, levou-nos buscar referências em teorias de secularização e de laicidade, e, a partir destas, traçar uma história do poder violento, cuja pretensão é a inelutabilidade, enquanto suas fissuras são abertas em espaços de resistências. A história da legitimação do poder que se quer único, soberano, de caráter universal, enquanto fragmenta a sociedade em indivíduos atomizados, fragilizando vínculos horizontais, e a dos surgimentos de resistências não violentas questionadoras da totalidade trágica, ao reconhecer a liberdade de ser com autonomia, enquanto se volta para a produção de partilha de bens comuns. Propomos reconhecer a igual liberdade de ser (expressa na crença da filiação divina) e de partilhar o bem comum em reconhecimentos mútuos (expressa pela ação social), uma expressão de resistência não violenta ao poder que requer a igual abdicação da liberdade pela via da fragmentação individualizante e submissão inquestionável à ordem totalizante. Os sem-religião nas periferias urbanas, nossos contemporâneos, partilhariam uma tal resistência, ao longo da história, com as melissas gregas, os profetas messiânicos hebreus, os hereges cristãos e os ateus modernos, cuja pretensão não é o poder, mas a partilha igual da liberdade e dos bens comuns. Estes laicos, de fato, seriam agentes de resistências de reconhecimento mútuos, em espaços de multiplicidade crescente, ao poder violento real na história.

Model Based Estimating System for Civil Concrete Structures

An earlier CRC-CI project on ‘automatic estimating’ (AE) has shown the key benefit of model-based design methodologies in building design and construction to be the provision of timely quantitative cost evaluations. Furthermore, using AE during design improves design options, and results in improved design turn-around times, better design quality and/or lower costs. However, AEs for civil engineering structures do not exist; and research partners in the CRC-CI expressed interest in exploring the development of such a process. This document reports on these investigations. The central objective of the study was to evaluate the benefits and costs of developing an AE for concrete civil engineering works. By studying existing documents and through interviews with design engineers, contractors and estimators, we have established that current civil engineering practices (mainly roads/bridges) do not use model-based planning/design. Drawings are executed in 2D and only completed at the end of lengthy planning/design project management lifecycle stages. We have also determined that estimating plays two important, but different roles. The first is part of project management (which we have called macro level estimating). Estimating in this domain sets project budgets, controls quality delivery and contains costs. The second role is estimating during planning/design (micro level estimating). The difference between the two roles is that the former is performed at the end of various lifecycle stages, whereas the latter is performed at any suitable time during planning/design.

Concurrent multi-scale modeling of civil infrastructures for analyses on structural deterioration—Part I : Modeling methodology and strategy

This paper aims to develop the methodology and strategy for concurrent finite element modeling of civil infrastructures at the different scale levels for the purposes of analyses of structural deteriorating. The modeling strategy and method were investigated to develop the concurrent multi-scale model of structural behavior (CMSM-of-SB) in which the global structural behavior and nonlinear damage features of local details in a large complicated structure could be concurrently analyzed in order to meet the needs of structural-state evaluation as well as structural deteriorating. In the proposed method, the “large-scale” modeling is adopted for the global structure with linear responses between stress and strain and the “small-scale” modeling is available for nonlinear damage analyses of the local welded details. A longitudinal truss in steel bridge decks was selected as a case to study how a CMSM-of-SB was developed. The reduced-scale specimen of the longitudinal truss was studied in the laboratory to measure its dynamic and static behavior in global truss and local welded details, while the multi-scale models using constraint equations and substructuring were developed for numerical simulation. The comparison of dynamic and static response between the calculated results by different models indicated that the proposed multi-scale model was found to be the most efficient and accurate. The verification of the model with results from the tested truss under the specific loading showed that, responses at the material scale in the vicinity of local details as well as structural global behaviors could be obtained and fit well with the measured results. The proposed concurrent multi-scale modeling strategy and implementation procedures were applied to Runyang cable-stayed bridge (RYCB) and the CMSM-of-SB of the bridge deck system was accordingly constructed as a practical application.

Concurrent multi-scale modeling of civil infrastructures for analyses on structural deteriorating—Part II : Model updating and verification

This paper is a continuation of the paper titled “Concurrent multi-scale modeling of civil infrastructure for analyses on structural deteriorating—Part I: Modeling methodology and strategy” with the emphasis on model updating and verification for the developed concurrent multi-scale model. The sensitivity-based parameter updating method was applied and some important issues such as selection of reference data and model parameters, and model updating procedures on the multi-scale model were investigated based on the sensitivity analysis of the selected model parameters. The experimental modal data as well as static response in terms of component nominal stresses and hot-spot stresses at the concerned locations were used for dynamic response- and static response-oriented model updating, respectively. The updated multi-scale model was further verified to act as the baseline model which is assumed to be finite-element model closest to the real situation of the structure available for the subsequent arbitrary numerical simulation. The comparison of dynamic and static responses between the calculated results by the final model and measured data indicated the updating and verification methods applied in this paper are reliable and accurate for the multi-scale model of frame-like structure. The general procedures of multi-scale model updating and verification were finally proposed for nonlinear physical-based modeling of large civil infrastructure, and it was applied to the model verification of a long-span bridge as an actual engineering practice of the proposed procedures.

Can B.I.M be civil?

After many years of development BIM (Building Information Modelling) is starting to achieve significant penetration into the building sector of the construction industry. This paper describes the current status of BIM and the drivers that are motivating the change from 2D CAD to BIM within the building sector. The paper then discusses what the implications of the technology underlying BIM may be for the civil construction sector of the construction industry. A project carried out by the Cooperative Research Centre for Construction Innovation is used as an example of this technology as well as several international examples.

Multi-objective mission flight planning in civil unmanned aerial systems

Unmanned Aerial Vehicles (UAVs) are emerging as an ideal platform for a wide range of civil applications such as disaster monitoring, atmospheric observation and outback delivery. However, the operation of UAVs is currently restricted to specially segregated regions of airspace outside of the National Airspace System (NAS). Mission Flight Planning (MFP) is an integral part of UAV operation that addresses some of the requirements (such as safety and the rules of the air) of integrating UAVs in the NAS. Automated MFP is a key enabler for a number of UAV operating scenarios as it aids in increasing the level of onboard autonomy. For example, onboard MFP is required to ensure continued conformance with the NAS integration requirements when there is an outage in the communications link. MFP is a motion planning task concerned with finding a path between a designated start waypoint and goal waypoint. This path is described with a sequence of 4 Dimensional (4D) waypoints (three spatial and one time dimension) or equivalently with a sequence of trajectory segments (or tracks). It is necessary to consider the time dimension as the UAV operates in a dynamic environment. Existing methods for generic motion planning, UAV motion planning and general vehicle motion planning cannot adequately address the requirements of MFP. The flight plan needs to optimise for multiple decision objectives including mission safety objectives, the rules of the air and mission efficiency objectives. Online (in-flight) replanning capability is needed as the UAV operates in a large, dynamic and uncertain outdoor environment. This thesis derives a multi-objective 4D search algorithm entitled Multi- Step A* (MSA*) based on the seminal A* search algorithm. MSA* is proven to find the optimal (least cost) path given a variable successor operator (which enables arbitrary track angle and track velocity resolution). Furthermore, it is shown to be of comparable complexity to multi-objective, vector neighbourhood based A* (Vector A*, an extension of A*). A variable successor operator enables the imposition of a multi-resolution lattice structure on the search space (which results in fewer search nodes). Unlike cell decomposition based methods, soundness is guaranteed with multi-resolution MSA*. MSA* is demonstrated through Monte Carlo simulations to be computationally efficient. It is shown that multi-resolution, lattice based MSA* finds paths of equivalent cost (less than 0.5% difference) to Vector A* (the benchmark) in a third of the computation time (on average). This is the first contribution of the research. The second contribution is the discovery of the additive consistency property for planning with multiple decision objectives. Additive consistency ensures that the planner is not biased (which results in a suboptimal path) by ensuring that the cost of traversing a track using one step equals that of traversing the same track using multiple steps. MSA* mitigates uncertainty through online replanning, Multi-Criteria Decision Making (MCDM) and tolerance. Each trajectory segment is modeled with a cell sequence that completely encloses the trajectory segment. The tolerance, measured as the minimum distance between the track and cell boundaries, is the third major contribution. Even though MSA* is demonstrated for UAV MFP, it is extensible to other 4D vehicle motion planning applications. Finally, the research proposes a self-scheduling replanning architecture for MFP. This architecture replicates the decision strategies of human experts to meet the time constraints of online replanning. Based on a feedback loop, the proposed architecture switches between fast, near-optimal planning and optimal planning to minimise the need for hold manoeuvres. The derived MFP framework is original and shown, through extensive verification and validation, to satisfy the requirements of UAV MFP. As MFP is an enabling factor for operation of UAVs in the NAS, the presented work is both original and significant.